Part of the Reeve & Co Group · Made in Mickfield, Suffolk, England

Home / Journal / Building a Table for the Egg: Sizes, Clearances and Timber

Building a table for the Egg: sizes, clearances and timber

Big Green Egg

Building a Table for the Egg: Sizes, Clearances and Timber

A Big Green Egg deserves a table built for it, not a hole cut into a generic cabinet. Here is what we have learned from building dozens of them: the clearances that matter, the timber that lasts outside, and the mistakes we see in kit-built alternatives.

9 minute read · Materials & construction

Start with the right opening, not the right look

Every Big Green Egg size needs a specific aperture, and getting it wrong by even a few millimetres makes the difference between a kamado that sits flush and one that rocks or scorches its surround. We work from the manufacturer’s own clearance figures for each size, not a rule of thumb:

Egg sizeFelt collar diameterMinimum worktop cut-outRecommended surround clearance
MiniMaxapprox. 330mm343mm40mm all round
Largeapprox. 495mm508mm50mm all round
XLargeapprox. 585mm600mm60mm all round

We take a template from the actual appliance on site wherever possible, rather than from a published drawing, because manufacturing tolerances between units are real. The oak carcase and stone worktop are then cut to that template, not the other way around.

Heat management is the part people underestimate

A ceramic kamado radiates significant heat through its felt gasket and lid hinge, and an Egg running at pizza-oven temperatures (250–350°C dome temperature) will heat the air immediately around it for sustained periods. Three things need to be right:

  • Worktop material directly around the Egg. We specify Dekton or granite within the immediate surround — both are rated for direct, sustained heat exposure and will not scorch, crack or discolour the way some composite stones can.
  • Air gap behind the hinge. The rear of most Egg models, where the hinge and vents sit, needs clear air space rather than a tight-fitting cabinet back, both for heat dissipation and so the lid can be propped fully open.
  • Storage beneath. We do not put combustible materials, gas lines or appliance storage directly beneath or immediately behind the firebox. Shelving and cabinet doors are positioned clear of the heat zone, confirmed on the CAD drawing before manufacture.
An oak Egg table with the Egg centred and a cupboard either side
An oak Egg table with the Egg centred and a cupboard either side

Which timber actually lasts outside

We build every table in solid English oak, finished with an exterior oil or paint system so it can live outside year-round without a cover. Oak is dense, naturally weather-resistant, and ages to a silver-grey if left unfinished or holds its colour well under an annual oil. Softer timbers, and most outdoor-grade plywood kits sold for kamado tables, simply do not have the density or natural oils to survive an English winter of freeze-thaw cycles without swelling, splitting or rotting at joints within a few seasons.

Every joint is mortice and tenon rather than screwed or doweled, because a mechanically fixed joint is the first thing to fail when timber moves seasonally. It costs more in bench time; it is also the difference between a table that needs replacing in five years and one that outlasts the house move.

The shelf, cabinet and finish options we build most

Beyond the core worktop-and-carcase table, most clients choose between three finish directions:

  • Classic open shelves — simple, affordable, easy to keep clean around the Egg, with charcoal and tool storage in full view.
  • Cabinet doors — fully enclosed storage for charcoal, tools and accessories, kept out of the weather and out of sight.
  • Stone plinth or granite & oak premium finishes — for a table that reads as furniture first and appliance housing second, often specified to match an adjoining kitchen or outdoor room.

See the full range on our egg & kamado tables page, including side-shelf and cabinet-door variants with sizes and guide prices.

A wheeled oak Egg table on lockable castors
A wheeled oak Egg table on lockable castors

Before you enquire

A few things people usually ask

Can you build a table around an Egg I already own?

Yes — this is most of what we do. Tell us the model and size, and ideally let us template from the appliance itself on our site visit, so the cut-out is exact.

Do you build for Kamado Joe as well as Big Green Egg?

Yes. See our comparison of the two for how the clearances and table design differ: Big Green Egg or Kamado Joe.

Does the table need a cover in winter?

No — the oak and stone are finished and specified to live outside uncovered year-round. See our guide to looking after an outdoor kitchen through winter for the occasional maintenance that keeps it looking its best.

How long does a bespoke Egg table take to build?

Currently 16 weeks from order to delivery, in line with our other single-appliance kitchen layouts.

Tell us which Egg or kamado you own, and we will template, draw and quote a table built to fit it exactly.

See egg & kamado tables · Order timber samples · Request a drawing & quotation

An oak Egg table with drawers
An oak Egg table with drawers

The Reeve & Co Group

Five names, one workshop

Reeve & Co

Bespoke joinery and interiors

Square & True

Bespoke English kitchens

Bryn Hall

Made-to-order English furniture

Sporting Cabinetmakers

Gun cabinets and sporting storage

Old Fashioned Bathrooms

Traditional and period bathrooms

Send us a photograph of the garden and what you like to cook.

We reply with a first idea, a guide price and a date to come and see it.

Start a commission WhatsApp the workshop

Reeve & Co Square & True Bryn Hall Sporting Cabinetmakers Old Fashioned Bathrooms

Fire & Oak Outdoors is a trading name of Reeve & Co Interiors Ltd, registered in England and Wales no. 09593800.

Scroll to Top